80A 2 Pole Distribution Block

The most common use of distribution blocks is in the electrical installation: in electrical switchboards, control and measuring automation and also in building installations.
These Distribution blocks are used to branch wires from one larger cross-section to several wires of smaller cross-section;
The distribution blocks have an easy-to-open top cover made of blue transparent plastic, which does not need to be opened for mounting and dismounting the output wires.
Blocks of the same size can be connected together, which makes the whole assembly more robust and compact.
An inbus wrench is used to tighten the screws.
The surface of the screws that is in contact with the conductor is specially treated to minimize the deformation of the conductor, while maintaining as much tightening as possible.

Specifications:

Rated cross-section [mm²]:	16
Rated current [A]	80
Short-time withstand current [A]	1920
Rated voltage Ui [V]	1000
Rated impulse withstand voltage Uimp [V]	8000
Tightening torque [Nm]	3 (1.5 / 16 mm²)
Tightening torque [Nm]	2 (1.5 / 6 mm²)
Tool	Inbus
Assembly method	TH 35 / on the plate
IP code	20
Number of clamping points	7
Number of levels	1
End cover plate required	NO
Testing	EN 60947-7-1
Dimensions [mm] (width / height / length)	30 / 46 / 65
Weight [g]	64
Packing [pcs]	1
Conductor cross section
Conductor cross-section – Output [mm²]	1 x 1,5 ÷ 16
Conductor cross-section – Output [mm²]	4 x 1,5 ÷ 6
Conductor cross-section – Output [mm²]	2 x 1,5 ÷ 16
Stripping length (Input) [mm]	10 (16 mm²)
Stripping length (Output) [mm]	10 (6 mm²)
Stripping length (Output) [mm]	10 (16 mm² )