Everbuild Expanding Foam 750ml

Code: RHIEB022
8.49

In Stock


Min Qty: 1

QtyAdd

Everbuild Expanding Foam 750ml

Everbuild Fix & Fill are quick setting one part polyurethane foams in aerosol form. 
Fix & Fill is supplied with attachable nozzles. The foam expands on application to up to 50 times its original volume and expands on application by 150%.

Once cured, the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5 to +25C, ideally 20C.

Benefits
  • Quick setting - can be cut, sawn or plastered in 1 hour.
  • Economical in use - expands up to 50 times its original volume.
  • Fills irregular and broad gaps where most conventional fillers would fail.
  • Possesses insulating and sound deadening properties.

Filling
  • Gaps around pipe entries through walls.
  • Gaps around window frames, door frames.
  • Electrical wire chasing prior to plastering
  • Deep joints prior to applying sealant or plaster
  • Irregular gaps in stone, brick, concrete or plaster

Fixing
  • Door frames
  • Timber structures
  • Window sills and thresholds.
  • Window frames

Insulating
  • Behind cladding to exterior walls.
  • Behind soffit and barge boards
  • In automotive applications.

Application 
  • ALWAYS WEAR PROTECTIVE GLOVES.
  • Shake can well before use (about 20 times). 
  • For the FILL AND FIX PRODUCT, carefully fix nozzle. Do not over tighten or force.
  • ALWAYS USE CAN UPSIDE DOWN. For GUN GRADE, tighten securely into one of our range of guns.
  • Only partially fill cavities as the foam will expand to fill the remaining space. Any excess foam can be removed whilst still wet with EVERFLEX FOAM CLEANER. Cured foam must be removed mechanically.. When used for fixing door frames, supports must be used until the foam is fully cured. 

 Specific Data:

Expansion 37 litres (750ml can)
Cell Structure Medium fine
Tack Free Approx. 8 minutes
Cuttable 20 mins to 1 hour depending on bead dimensions.
Full Load Bearing Stability App, 12 hours (20mm bead)
Working Temps 5oC - 25oC. (Optimum 20oC)
Tensile Strength 18N/cm2 (DIN 53455)
Elongation At Tension 30% (DIN 53455)
Shear Strength 8N/cm2 (DIN 53422))
Flexural Strength 20N/cm2 (DIN 53423)
Compressive Strength 5N/cm2 (DIN 53421) at 10% stress.
Water Absorption 0.3 Vol % (DIN 53428)
Thermal Conductivity 0.04 W/Mk (DIN 52612)
Temp Res Of Cured Bead Long Term: -40 - +100oC
Short Term: -40 - +130oC
Building Material Class B3 (DIN 4102, Part 1)